V50 L5-2.4L VIN 39 B5244S7 (2005)
Use a pen to mark all the tape pieces see illustration.
13.
Checking the position of the side window pane in the sealing strip, continued
Measure the distance between the markings and the top of the side window pane. The distance should be as follows:
Position 1: within 0.16-0.24 inch (4-6 mm)
Position 2: no less than 0.06 inch (1.5 mm)
Position 3: within 0.16-0.24 inch (4-6 mm)
14.
Checking the position of the side window pane in the sealing strip, continued
If the measurements are within the aforementioned intervals remove the tape pieces and continue with step 18. If the measurement is less than 0.06
inch (1.5 mm) at position 2 continue with step 15.
15.
Adjusting the position of the side window pane in the sealing strip
Place a piece of masking tape on the rear part of the door arch level with the side window pane.
