V50 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Door Lock Cylinder: Service and Repair
Lock cylinder, door
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Note! Only the driver's door has a lock cylinder.
Removal
Removing the lock cylinder
Remove the cover in the end of the door.
Slacken off the 1 screw for the lock cylinder.
Note! Only slacken off the screw 4 turns. Otherwise the screw may fall down into the door.
Pull the lock cylinder straight out.
Remove the cover over the lock cylinder.