V50 2.4i L5-2.4L VIN 39 B5244S7 (2010)
METHOD:
^ Cut off the damaged portion of the original wheel speed sensor cable from the harness inside the engine bay,
^ Cut off the connector at the car harness end of the replacement cable as close to the end as possible.
^ Install replacement cable at the wheel speed sensor and route the cable along the original location using it as a guide.
^ Find a suitable location for the splice and cut the cable accordingly.
^ Splice the cables together as in: VIDA., Cleaning, inspection and adjustment / Electrical system/ Cables and fuses, Cables
Note: After performing the repair, take care for correct routing and fixation of the ABS cable to assure that no interference between cable and wheel
is possible.
WARRANTY CLAIM INFORMATION