V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Removal
Removing spoiler
CAUTION: Use personal safety equipment and remember to carry out work in premises with good ventilation.
Use a hot-air gun to carefully warm the spoiler.
Carefully lift up one edge of the spoiler.
Detach the spoiler using a weatherstrip tool.
CAUTION: Do not damage the vehicle paintwork.
Remove:
-
the spoiler
-
any tape remains. Use: 951 2942 and 951 2949.
Installation
Installing the mini spoiler
Wash the area for the spoiler with a mixture of 50%
isopropanol and 50% water.
Wipe dry using a clean lint-free cloth or similar.
NOTE: In order for the spoiler to adhere, the surface must be clean and free of dust and grease.
Installing the mini spoiler, continued
Install the mini spoiler on the rear windshield using protective tape.
The following measurements apply:
M1 = 1-2 mm
M2 = 1-2 mm
Mark the contours of the mini spoiler on the underside underneath using a suitable pen.