volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness for the Radio (Accessory Electronic Module)|Page 15814 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15812
Page 54
background image

-

Remove the three screws in the upper edge of the trim for the unit and radio and dashboard environment panel.

-

Remove the trim from the unit. Pry off the catches along the vertical and lower sides of the trim. Pull off the trim. Do not damage the catches. The
catches are thin and easily broken

-

Remove the three pieces of foam tape from the centre console. They will not be reused.

-

Remove the four screws on the reverse of the dashboard environment panel. Remove the dashboard environment panel from the bracket.

Cable Harness for the Radio (Accessory Electronic Module)|Page 15814 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15812