V70 L5-2.4L VIN 61 B5244S (2004)
-
Detach the bumper in accordance with the above. Carefully pull the cable (1) out through the hole in the car.
-
Place the bumper on a clean underlying surface that will not damage the paint.
Illustration A
-
Remove the rivet (1) on the bracket (2) for the silencer. Use cutting nippers.
-
Remove the screws (3) on the bracket.
-
Remove the bracket by detaching the rubber mounting (4).
The bracket shall not be re-used.
Illustration B
-
Remove the screws (1). Remove the bracket (2).
The bracket shall not be re-used.
Illustration A
-
Install masking tape on the outside of the bumper to avoid damage from the base of the saw.
-
Leave the masking tape in place throughout the installation procedure.