V70 L5-2.4L VIN 61 B5244S (2004)
Check if there is still air in the system. Press down the brake pedal using a jack at a pressure equivalent to heavy braking, 200 Nm. With the engine off
and the brake pedal depressed 3-4 times, the pedal travel must not exceed 40 mm.
If the pedal travel exceeds this limit, bleed again and re-check the pedal travel.
That there is no brake fluid leakage.
Remove the bleed unit connector from the brake fluid reservoir.
Check that the brake fluid level is not above the maximum marking.
Brake Pipe, Rear Wheel, Replacing
Brake pipe, rear wheel, replacing
Preparations for replacement. Applies to both left and right sides
Collect the brake fluid
See Replacing the brake fluid (using a bleeding unit) See: Brake Fluid/Service and Repair/Replacing the Brake Fluid (Using A Bleeding Unit)
See Brake fluid, replacing See: Brake Fluid/Service and Repair/Brake Fluid, Replacing
Replacing the brake pipe for the right rear wheel
Preparations
