V70 L5-2.4L VIN 61 B5244S (2004)
-
Secure the new connector to the loose cable
-
Pull up the sensor connector between the fuel tank and bodywork to the other connector
-
Disconnect the cable from the connector
-
Connect the connector for the sensor to the existing connector
-
Reinstall the fuel pump (FP) cover.
Finishing work
-
Fold the soundproofing carpet back into place
-
Reinstall the backrest
-
Install the screw. Tighten to 50 Nm
-
Connect the connector
-
Install the screws and the seat belts. Tighten the screws in the side of the body. Tighten to 50 Nm. Tighten the screws in the floor. Tighten to 80
Nm
-
Install the side backrest panel
-
Fold the seat cushion back into place
-
Install the wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair
Function test
-
Read off and erase any diagnostic trouble codes (DTCs) stored in the control module
-
Interrupt the diagnostic function by turning off the ignition.