V70 L5-2.4L VIN 61 B5244S (2004)
-
Remove the pen holder above the gear selector panel.
-
Remove the panel (1) above the gear selector:
-
Carefully pry off at the back using a weatherstrip tool.
-
Remove the two screws (2) on the lower edge of the panel
-
Remove the panel (3).
Note: The radio component and the dashboard environment panel are complementary and are mounted at the join with hooked mountings.
Hint: To facilitate removal: Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the center
console and the dashboard environment panel.
-
Pull the dashboard environment panel downwards at the same angle.
Hint: The dashboard environment panel is correctly secured. Force is required to remove it.
-
remove the connectors. Lift out the panel.
-
Install in reverse order.
Note: If any of the outer hooks break off, this must be rectified.
Tape the 3.5 mm thick component measuring 20 X 20 mm to the reverse of the dashboard environment panel. Use double-sided adhesive tape.
Fix the other side of the piece with double-sided adhesive tape so that there is a solid anchorage when reinstalling against the center console.
Front panel, replacing