V70 L5-2.4L VIN 61 B5244S (2004)
-
Detach the pipe coupling from the receiver / dryer
-
Detach the pipe from the bracket. Remove the pipe.
Installation
Receiver drier hoses
Note! Use new O-rings lubricated with compressor oil.
-
Position the pipe on the mounting in the bracket. Position the pipe coupling on the receiver / dryer
-
Position the screw and tighten the pipe coupling on the condenser.
Tighten to 10 Nm.
-
Install the condenser. See Condenser, replacing See: Heating and Air Conditioning/Condenser HVAC/Service and Repair (engine B5254T4) or
Condenser, replacing See: Heating and Air Conditioning/Condenser HVAC/Service and Repair (other engines).