V70 L5-2.4L VIN 61 B5244S (2004)
Install:
-
the pipe nipple in the pump. Tighten to 25 Nm
-
the lock bracket (2).
Tighten the screw (1). Tighten to 24 Nm
Note! There may be a gap (3) of a few millimeters between the pipe coupling and the power steering pump. Bend the bracket so that the twelve
edged mounting on the bracket is on the nut.
Install the plastic charge air pipe over the engine (turbo charged engines only).
Remove the lock grip pliers from the feeder hose.
Carry out finishing work. See Replacing the return hose, B5244T5, B5254T2 See: Replacing the Return Hose.