V70 L5-2.4L VIN 61 B5244S (2004)
Press the gear selector lever knob down over the support ring until it locks.
Installing the bracket and boot on the gear selector lever
Pull the panel upwards slightly towards the gear selector lever knob.
Pull up the bracket and the gear selector lever knob. Turn the bracket slightly so that the guide (1) inside the bracket is correctly positioned on the slot
on the gear selector knob (1). Pull the bracket upwards so that it locks. Check that the bracket is secure on the gear selector lever knob.
Installing the panel on the center console
Angle the panel downwards. Press the panel into place in the center console. Install the panel (the pen holder) between the center console and the
dashboard.
Top Panel Gear Selector Assembly Manual, Replacing
Top panel gear selector assembly manual, replacing
Removal
Removing the spaceball
