V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Only applies if the car has clips:
-
Remove the clips (1) at the bottom of the bumper cover. First press in the centre of the clips until they click
-
Remove the clips.
Note! The clips will be reused.
Applies to all models:
-
Pull the bumper backwards slightly. Bend out the sides (2) so that they detach from the mounting (3). Then pull the bumper backwards until it
detaches completely
-
Place the bumper on a clean underlay that will not damage the paint.
Only applies if the car is equipped with mouldings:
-
Carefully remove the moulding (4) from the expander clips.
Illustration A
-
Remove the rivet (1) on the bracket (2) for the silencer. Use cutting nippers
-
Remove the screws (3) on the bracket
-
Remove the rubber mountings (4). Remove the bracket. The bracket will not be used again.
Illustration 7B
-
Remove the screws (1). Remove the bracket (2). The bracket will not be used again.
Illustration A