V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
afterwards.
-
After cutting, smooth off the edges using a file.
Illustration C applies to the V70R with chassis number (CH -458999)
-
Apply the tape on the outside of the exhaust pipe clip to avoid damage from the base of the saw. Leave the masking tape in place during
installation.
-
Cut along the marked raised area and remove the cut-out area.
-
After cutting, smooth off the edges using a file.
Applies to the XC70
-
Centre the cutting template and position it as illustrated.
-
Carefully mark out the cutting lines around the cutting template.
-
Cut along the markings on the inside of the bumper to make the cut-out for the tow hitch. Cut out so that the marking lines remain in the bumper
afterwards.
-
After cutting, smooth off the edges using a file.
Installing the towbar