V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! On cars with 6-cylinder engines: Disconnect the connectors from the master cylinder.Mark up a connector.
Disconnect the connectors on the power brake booster.
Note! If the car has hydraulic clutch: Block the hose to the clutch cylinder. Use hose pliers.
Remove the master cylinder
Avoid brake fluid spillage when removing.
Note! Ensure that the gasket between the power brake booster and the master cylinder stays in place on the master cylinder.
Remove the soundproofing panel and the power brake booster
For the soundproofing panel, see Bushing, brake pedal, replacing, M56, L.H.D, M58, L.H.D See: Hydraulic System/Brake Master Cylinder/Service and
Repair/Bushing, Brake Pedal, Replacing
For the power brake booster, see Power brake booster, replacing, R.H.D See: Power Brake Booster, Replacing, R.H.D.
Transfer the components to the new power brake booster