V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Install the lower screws to assemble the radiator unit. Tighten the screws. Tighten to 10 Nm
-
Remove the tie straps
-
Check that the radiator unit is against the rubber seal
-
Tighten the radiator unit to the member. Tighten to 25 Nm.
-
Install the lower radiator hose
-
Remove the lock grip pliers
-
Install the screw for the mounting for the engine wiring cable duct at the front edge of the sub-frame
-
Install the lower oil cooler hose on the radiator unit (automatic gearboxes only).
Work from above