V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Compressor Clutch: Specifications
Checking the clearance
Check the clearance between the turning plate and the belt pulley with a feeler gauge.
The clearance should be 0.3 - 0.5 mm.
0.3 mm clearance all the way round.
It must not be possible to insert 0.6 mm at any point.
If clearance is not within given values, replace the shims.
The following dimensions are available:
-
0.2 mm
-
0.3 mm
-
1.0 mm.