V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Stabilizer Link: Service and Repair
Anti-roll bar link front, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct
Removal
Remove:
-
the wheel
-
the anti-roll bar link from the mountings. Use a Torx-wrench as a counterhold so that the boot is not damaged.
Installation
Install:
-
the anti-roll bar link in the spring strut. See: Tightening torque See: Specifications
-
the anti-roll bar link in the anti-roll bar. See: Tightening torque See: Specifications.
Note! Use a Torx wrench as a counterhold so that the rubber boot is not damaged.
-
the wheel. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.