V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the gear selector cable from the ball joint.
Use puller999 7071 Puller See: Tools and Equipment/999 7071 Puller.
Hint: The screw on the puller is turned counter-clockwise to pull the gear selector cable loose.
Carefully pry up the catches (1) and slide the cable sleeves upwards on both the gear selector cables.
Installation
Note! For tightening torques, see Tightening torque See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications.
Installing the cables and the gear selector assembly