volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

TV NTSC/PAL|Page 25205 > < TV NTSC/PAL|Page 25203
Page 11
background image

-

Clamp the cables on the parcel shelf, at the C-post and at the lead-in to the cargo compartment. See the arrows in the illustration.

-

Remove the three screws (1) holding the CD ROM changer and bracket at the body

-

Lift up the unit and place it on the left rear side member.

-

Take the TV tuner (1) and the three screws (2) from the kit. Tighten the TV tuner on the reverse of the bracket for the CD ROM changer

-

Connect the cable harness (3) with the green connector and the new DIN cable (4) to the TV tuner

-

Reinstall the CD ROM changer and the TV tuner.

TV NTSC/PAL|Page 25205 > < TV NTSC/PAL|Page 25203