V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Remove:
-
the four perforated sections (1) of the insulation panel
-
the nuts (2) for the bumper
-
the antenna connector (3).
Preparations, rear suspension
-
Raise the car
-
Remove the rear wheels.
Illustration 7A only applies to cars with mudguards
-
Carefully drill out the rivets that hold the mudguard in place on both sides. Use a - 6 mm (1/4") diameter drill bit
-
Remove the mudguards.
Illustration 7B applies to all cars
-
Unscrew the screw (1) almost all the way on the left and right hand sides in the rear edge of the wheel arch