V70 2.4 L5-2.4L VIN 61 B5244S (2001)
The trailer hitch covered by this method is recognizable by the following features:
Alternative 1
-
Green handle (A)
-
Key-lock (B)
-
Area around indicator pin is circular (C).
Alternative 2
Tow hitch is mounted temporarily as shown in illustration, step 2.
Removing temporarily mounted tow hitch
2
Remove bolt securing tow hitch. Remove washers, spring and locking cylinder.
Replacing tow hitch
3
Remove cover (if fitted) on connecting pin. Check tow hitch P/N.
The number is stated after PART NO. on the type designation plate, which is located on the left-hand side of the tow hitch.
Unpack the new tow hitch and connecting pin with the P/N in the table shown.
Note!
If the type designation plate is absent, the tow hitch can be identified by measuring the ball height as described in the following operation and
cross-referencing with the values specified in the table.