volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Trip Computer|Service and Repair|Page 26592 > < Trip Computer|Service and Repair|Page 26590
Page 4
background image

-

Disconnect the upper and lower steering column cover

-

Remove the two screws (1)

-

Hold the covers apart. Remove the lever. This will not be used again.

Installing, the trip computer control

-

Install the new lever (1) in position

-

Tighten the lever using the two screws

-

Push the upper steering column cover down over the two levers. Ensure that the two rubber boots (2) align with the cut out in the steering column
cover.

Finishing work

-

Push the upper and lower steering column cover together (1) until the lock hooks securely into each other. At the same time adjust so that they
align in the cut out for the lower cover

-

Reinstall the three screws. Tighten the three screws

-

Position the steering wheel in the uppermost position by moving the adjustment lever upwards.

Trip Computer|Service and Repair|Page 26592 > < Trip Computer|Service and Repair|Page 26590