V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Press in the screw so that the screw head bottoms out and the slide mounting releases.
Separate the connector for the fog lamp.
Repeat on the other side.
Pull the bumper forward while pulling both the sides outwards so that the edges release from the slide mounting.
Hint: This operation is easier with two people.
Transferring components
Cars with fog lamps:
Cut out the embossed cover (1). Cut around the outer marking (2).
First cut a channel partially through the cover around the marking. This will provide a cutting template.
Carefully cut through the rest of the cover.
Remove the cut out cover and trim the edges if necessary.
Hint: Use a hot knife.
Transfer the fog lamps. See Fog lamps, front, replacing See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Fog Lamps, Front, Replacing.
