volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 26922 > < Removal and Replacement|Page 26920
Page 1
background image

Rear Door Panel: Overhaul

Transferring Components 
Special tools: 9512777
Special tools: 9512778

The following components are included in the door panel:
Door panel base.
Cover.
Armrest.
The front or rear handle.
SIPS block.
The trim strip and the inner opener.
Handle.
Loudspeaker, door module.
Loudspeaker grille.

These components can be transferred to a new door panel.

Remove the head from the plastic rivet with a drill bit or a chisel for example.

Preparations: Get out holders 945780 (5 mm diameter) and washer 955891.

A maximum of 18 washers is required.

After removing the side panel assembly, the armrest, front handle and the upper loudspeaker grille must be replaced with new components.

Four different methods can be used for installation:

Molten riveting.

Screwed joint.

Locking with holders.

Taping.

A combination of the above.

Removal and Replacement|Page 26922 > < Removal and Replacement|Page 26920