V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Method 1 = Molten riveting with heat, hot-air gun 9512777 and the nozzle from kit 9512778 and tools to press with.
Method 2 = Screwed joint with screw 969464 and washer 955891. Use 2–3 washers at each point so that the screw does not penetrate the surface.
Method 3 = Locking with holder 945780.
Method 4 = Methods 1 and 3 combined.
Method 5 = Method 2 or 4 depending on whether new or old components are being used.
Method 6 = Taping with double-sided adhesive tape.
Method 7 = Bonding using hot adhesive.
The method to be used to secure the components is marked in the illustrations.
In certain cases two methods can be used, depending on whether the components are new or old.
Remember that there must not be any play after joining.
