volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Badge Rear, Replacing|Page 27056 > < Badge Rear, Replacing
Page 2
background image

Model designation

-

Measure a horizontal line 164 mm (6.46") below the edge of the glass (M1)

-

Measure a horizontal line (M2) 60 mm (2.36") below horizontal line M1

-

Measure the distance along the lower dimple (M5) from the edge of the tailgate (61 mm (2.40"))

-

Measure distance (M4) 20 mm (0.78") below the edge of the glass. The line between M4 and M5 forms a diagonal line. This line shows the angle
of slope of the letters of the model designation

-

Remove the backing (Leave the securing film in place)

-

Guide the rear edge of the emblem against the angled line (M4, M5).

Badge Rear, Replacing|Page 27056 > < Badge Rear, Replacing