V70 2.4 L5-2.4L VIN 61 B5244S (2001)
NOTE: It is arbitrary which of tools 999 5575, 999 5576 and 951 2564 is used.
Installing the bracket for the heated oxygen sensor (HO2S)
-
Lift up the sub-frame slightly, approximately 50 mm from the car body.
-
Install the wiring for the heated oxygen sensor (HO2S) on the sub-frame.
Marking for the bushing on the sub-frame
-
Clean the hole for the bushing in the sub-frame.
-
Press out the bushing by hand.
CAUTION: The markings on the bushing and sub-frame must be positioned opposite each other.
