V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Applies to all cars
-
Remove the nuts (1) in the rear crossmember. This allows the bumper to be removed.
-
Separate the connector (2) for the antenna.
Illustration B
Applies to cars with parking assistance
-
Detach the parking assistance module (PAM) from its location on the member on the left-hand side of the cargo compartment.
-
Detach the smaller connector from the control module.
-
Raise the car.
Illustration A only applies to cars with mudguards
-
Remove the rear wheels.
-
Carefully drill out the rivets holding the mudguard on both sides. Use a - 6 mm (13/32") diameter drill bit.
-
Remove the mudguards.
Illustration B applies to all cars