V70 2.4 L5-2.4L VIN 61 B5244S (2001)
21. Protective cover (purchased separately).
22. Screw 4.8 X 9.5.
HINT: Type approval of the towbar is in the table.
NOTE: New sealing compound is required for cars up to week 13, year 2000. The sealing compound for these cars is ordered separately (P/N
8625515). NB: It is recommended that the work in steps 5 and 17 is carried out by two people.
Preparations
-
Turn the ignition key to position 0.
-
Remove the key from the ignition switch (does not apply to cars with automatic gearboxes).
NOTE: Wait at least five minutes before disassembling the connectors or removing other electrical equipment.
Illustration A
-
Lift up and remove the floor hatch (1).
-
Lift up and remove the storage cover (2).
-
Remove the side panel (3) on the left-hand side.
Illustration B
-
Remove the two nuts from the front edge of the battery holder. Remove the cover over the battery. Then unscrew the screw in the rear edge a few
turns. Remove the holder.
-
Remove the battery cover.
-
Disconnect the battery negative lead.
-
Move or remove the battery to facilitate access.
Illustration A