V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Place the bumper on a clean underlying surface that will not damage the paint.
Only applies if the car is equipped with mouldings
-
Carefully remove the moulding (4) from the expander clips.
Illustration B applies to the XC70
-
Pull the bumper backwards slightly. Bend out the sides (2) so that they detach from the mounting (1). Then pull the bumper backwards until it
detaches completely.
-
Place the bumper on a clean underlying surface that will not damage the paint.
Illustration C applies to cars with parking assistance
-
Detach the bumper in accordance with the above. Carefully pull the cable (1) out through the hole in the car.
-
Place the bumper on a clean underlying surface that will not damage the paint.
Illustration A
-
Remove the rivet (1) on the bracket (2) for the silencer. Use cutting nippers.