V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Remove the screw from the control module
-
Remove the control module.
Check
Check that the control module connectors are intact.
Installing the control module
-
Screw the control module screw into place
-
Connect the connector for the control module
-
Reinstall the cover for the control module connector
-
Connect the 2 connectors
-
Press the bulb holder into place
-
Install the ground lead
-
Install the 2 screws at the front edge
-
Install the lens.
Ordering software
Order software
Programming the control module
Program the new control module
Finishing
Program in the data read off from the old control module.
Interior lighting, replacing
Removal
Preparations
-
Remove the interior lighting and the switch for the sun roof.
NOTE: The rear view mirror (upper electronic module) does not need to be removed.