V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Seat Latch: Testing and Inspection
Whiplash Unit, Checking
There are two versions of deformation element. The first version is used in cars up to the following chassis number.
V70 Volvo Torslanda (VTM): -56776
V70 Volvo Europe Car (VEC): -57997
The second version is used in cars with the following chassis number.
V70 Volvo Torslanda (VTM): 56777-
V70 Volvo Europe Car (VEC): 57998-
Checking the WHIPS system, version one
NOTE: The WHIPS system must be checked after every collision
Fold or angle the backrest forward.
Lift the upholstery/impact protection at the end mounting.
Check on the outside that the green indicator pin (G) is intact.
Gently pull the indicator pin to check that it is in position and is undamaged. If the indicator pin is missing or deformed, the deformation element must be
replaced.
Checking the WHIPS system, version two
NOTE:
-
The WHIPS system must be checked after every collision
-
The illustration shows the left-hand side mounting. The right-hand side is the mirror image.
The nut always faces the center of the seat.
(A) = reference mark. Always the second outermost section of the WHIPS mounting.
(B) = deformation element in the WHIPS mounting.
