V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Separate the brake pipe and the brake hose at the bracket.
Counterhold the brake hose so that it does not twist.
Remove the brake pipe from the car.
Install the new brake pipe
Note: The new brake pipe must be bent into the correct shape when installing. This is important otherwise the pipe may be subject to stresses when it
is in place.
Tighten pipes on brake hose to 17 Nm
Check that the hose is not twisted.
Install the brake pipe in the ABS hydraulic modulator
Install:
-
the brake pipe in the ABS hydraulic modulator. Tighten to 17 Nm
-
the pipe in its holder. Open the holder
-
the ABS line in its clips on the brake pipe
-
the integrated relay / fusebox.
-
the Air Cleaner (ACL) housing.
Brake pipe right front, replacing