volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Hose Front, Replacing|Page 20413 > < Brake Hose Front, Replacing|Page 20411
Page 30
background image

See Installing wheels.

Install the integrated relay / fusebox and the connector for the ABS unit 

Hydraulic unit, replacing.
Install the Air Cleaner (ACL) housing 
Brake pipe master cylinder / ABS unit, replacing.
Fill and bleed the brake system 
See Brake system bleeding (using bleeding unit).

Brake Pipe, Rear Wheel, Replacing

Brake pipe, rear wheel, replacing

Preparations for replacement. Applies to both left and right sides 

Collect the brake fluid

See Replacing the brake fluid (using a bleeding unit) See: Brake Fluid/Service and Repair/Replacing the Brake Fluid (Using A Bleeding Unit) 
See Brake fluid, replacing See: Brake Fluid/Service and Repair/Brake Fluid, Replacing 

Replacing the brake pipe for the right rear wheel

Preparations

Remove the 4 screws holding the heat deflector onto the central cross member.
Drill out the 2 blind rivets holding the rear heat deflector to the cross member.
Remove the 2 screws and nuts holding the exhaust pipe onto the rear cross member.
Slide the rear heat deflector forward over the front heat deflector to expose the right brake pipe.

Remove the brake pipe from the clips and mountings

Brake Hose Front, Replacing|Page 20413 > < Brake Hose Front, Replacing|Page 20411