volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 20440 > < Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 20438
Page 5
background image

Check that the new ABS hydraulic modulator is the correct type depending on whether the car is equipped with STC (stability and traction control) or
not.
An ABS modulator for ABS has only eightvalves while an ABS modulator for ABS and STC (stability and traction control) has ten valves.

Warning! Never, under any circumstances, open the ABS hydraulic modulator. Reassembling it requires special equipment and facilities.

Installation

Check the control module

Warning! No ABS, stability and traction control functions are available when there is communication with the Brake control module (BCM)
(Volvo Diagnostics are activated). ABS warning lamp flashes for as long as the diagnostics are activated. To cancel the diagnostics before test
driving the vehicle, the ignition must be switched off!

Model years -2001.
See Control module (ABS), replacing See: Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and Repair/Brake
Control Module (BCM), Replacing.
Model years 2002-.
See Brake control module (BCM), replacing See: Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and
Repair/Brake Control Module (BCM), Replacing.

Assemble the ABS hydraulic modulator and the bracket

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 20440 > < Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 20438