V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
the O-ring on the sensor
-
lubricate the O-ring lightly using a soap solution
-
the sensor for the power brake booster so that the locking lug goes into position.
Gently pull the sensor. Check that the sensor is secure.
Check that the snap ring is in position.
Connect the connector to the sensor.
Power Brake Booster, Replacing
Power brake booster, replacing
Special tools:
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
998 5972 JACK See: Tools and Equipment/998 5972 Jack
999 5517 SCREW LEFT See: Tools and Equipment/999 5517 Screw Left
999 5518 SCREW RIGHT See: Tools and Equipment/999 5518 Screw Right
Removal
Remove the torque rod between the wheel arches