volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Auxiliary Water Pump|Service and Repair|Page 6341 > < Auxiliary Water Pump|Service and Repair|Page 6339
Page 6
background image

Thread the thicker protective tube from the kit over the join.
Adjust the length so that it overlaps the thinner protective tubes by approximately 10 mm on each side.
Wind insulation tape around the join.

Installation

Installing the water pump and rubber cap

Auxiliary Water Pump|Service and Repair|Page 6341 > < Auxiliary Water Pump|Service and Repair|Page 6339