V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Camshaft Gear/Sprocket: Service and Repair
Camshaft seal/variable valve timing (VVT) unit, replacing
Special Tools: 999 5452, 999 5651, 999 5719, 999 5718, 999 5474, 999 5451, 999 5919, 999 5450
NOTE:
As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removal
CAUTION: There are a number of versions of the variable valve timing unit. Therefore it is extremely important to always read the
information referring to the engine variant/model year to be remedied.
Removing the camshaft seal
NOTE: Crankshaft and camshafts must not be turned more than is stated in the method description.
If the shafts are turned in any other way the valves may be damaged.
Remove:
-
the cable from the battery negative terminal.
-
the cross stay between the suspension turrets
-
the upper timing belt cover
-
the cover over the ignition coils
-
the inlet hose between the air cleaner (ACL) and throttle body (TB)
-
the crankcase ventilation hose from the inlet hose
-
place the inlet hose to one side
-
the upper engine stabilizer brace
-
the camshaft position (CMP) sensor housing
-
the trigger wheel
-
the rear cover for the intake camshaft
-
the servo reservoir and the expansion tank. Lift them up and place them on top of the engine
WARNING: Ensure that no power steering fluid is spilled. Extremely flammable.
-
the auxiliaries belt
-
the front timing belt cover.
Position the engine according to the marking
-
Raise the car.