V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Hold the center screw in place. Turn the tensioner eccentric clockwise to 10 O'clock using a 6 mm Allen key.
-
Remove the timing belt from the camshaft pulleys.
Removing the timing gear pulley with the variable valve timing unit
-
Use Camshaft Adjustment Tool:
-
Install camshaft adjustment tool 999 5452 at the rear of the camshafts.
Remove:
-
the plug at the front edge of the variable valve timing unit (TORX 55)
-
the center screw in the variable valve timing unit (TORX 55). Carefully pull out the timing gear pulley with the VVT unit
-
timing gear pulley without VVT
-
the screws and the timing gear pulley.
Replacing the camshaft seal
-
Carefully press in tool 999 5651 between the sealing ring and the camshaft.
-
Carefully pry out the seal.
Cleaning
-
To clean the shaft journal and mating surface, use emery cloth P/N 951 1024.