V70 2.4 L5-2.4L VIN 61 B5244S (2001)
5
Carefully press the pistons upwards. Use special tool 999 5746.
Ensure that the connecting rod and end cap is marked as
described previously.
Remove the remaining connecting rods and pistons in the
same manner.
Check for vertical abrasions or other damage in the cylinder liner.
6
Removing the piston from the connecting rod
Note the direction of the arrow on top of the piston in relationship to the markings on the connecting rod and end cap. Arrow location may vary from that
shown in the illustration.
Remove the circlips and press out the wrist pin. Clean the connecting rods and bearing caps before installing new pistons.
Warning!
The circlips can easily spring out. Wear appropriate eye protection when removing circlips.