volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 5799 > < Customer Safety Information|Page 5796
Page 1
background image

Engine Oil: Procedures

Checking the Oil level:

The oil level should be checked every time the car is refueled. This is especially important during the period up to the first service.

CAUTION:  Not checking the oil level regularly can result in serious engine damage if the oil level becomes too low.

Park the car on a level surface and wait for at least 5 minutes after the engine has been switched off. Be sure the oil level is maintained between the upper
and lower marks on the dipstick. Low oil level can cause internal damage to the engine and overfilling can result in high oil consumption. The distance
between the dipstick marks represents approx. 1.6 US qt (1.5 liter). The oil should preferably be checked when cold, before the engine has been started

NOTE: The engine must be stopped when checking the oil.

WARNING!  Do not allow oil to spill onto or come into hot exhaust pipe surfaces.

Adding oil (topping up):

^

Add oil of the same kind as already used.

^

Capacity (including filter): 6.1 US qts. (5.8 liters).

^

Capacity (including filter and oil cooler): 7.1 US qts. (6.7 liters).

^

The oil filter should be replaced at every oil change.

Procedures|Page 5799 > < Customer Safety Information|Page 5796