V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Intake Manifold: Specifications
Intake Manifold Torque
Remove the intake manifold by lifting it................................................................................................................................................approximately 20 mm
The Intake Manifold And Gasket
-
Install a new gasket held in position by the lower screws for the intake manifold
-
Install the intake manifold
-
Install the crankcase ventilation. The crankcase ventilation must be installed through the gap between the second and third channels
-
Install the three upper screws.
Tighten all screws (starting from the center)........................................................................................................................................................20 Nm
Install the Fuel Rail And The Injector Nozzles.
Use new screws. Tighten................................................................................................................................................................................................10 Nm
Press the quick-release connector together until a clicking sound is heard.
Intake manifold..............................................................................................................................................................................................................19 Nm