V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Use pliers 999 5670 Pliers See: Tools and Equipment/999 5670 Pliers to lift the cover from the cylinder head.
Install the pliers at the stop lugs.
Start with cylinder 1 and work alternately backward.
Slacken off the wing nuts approximately 2 turns. Repeat the procedure.
Carefully press out the front and rear camshaft seals.
Note! Be very careful so that the sealing faces on the camshafts are not damaged.
Remove
-
tools 999 5454
-
the camshaft cover
-
the camshafts.
Lift out the valve lifters. Use a magnet or a suction cup.
Note! Mark up and position the lifters so that their original positions can be established.
