volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Exhaust Manifold Gasket > < Cylinder Head Gasket|Service and Repair|Page 5907
Page 16
background image

Install

-

the screw that holds the inlet pipe for the coolant pump to the cylinder block

-

the splash guard under the engine

-

the nuts for the cover in the right fender liner

-

the right front wheel  Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

-

the battery negative lead. Also read  Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.

Check

Replace the oil and oil filter.

Check:

-

the engine oil level

-

the servo oil level

-

the coolant level.

Warm up the engine until the thermostat opens.
Check the engine for leaks.
Top up the coolant if necessary.

Exhaust Manifold Gasket > < Cylinder Head Gasket|Service and Repair|Page 5907