V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Note! When installing from new, drill a 4 mm hole for the fuel line as illustrated.
Reinstall in reverse order.
Note! When installing for the first time connect the fuel line to a vacuum pump. Suck carefully until fuel comes out. Connect the cables and
hoses.
Final check
Note! Start the engine and let it idle for a few seconds before starting the heater.
Test run the heater. Check the function of the heater. See Engine coolant heater, test running See: Testing and Inspection/Component Tests and General
Diagnostics/Engine Coolant Heater, Test Running
Check both the coolant hoses and the fuel lines for leakage.
Top up the coolant if necessary.
Check that no diagnostic trouble codes (DTC) have been stored during the repair work.
