volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Auxiliary Water Pump|Service and Repair|Page 24250 > < Glow Plugs, Engine Coolant Heater, Replacing|Page 24246
Page 1
background image

Auxiliary Water Pump: Service and Repair

Water pump engine coolant heater, replacing

Special tools:

951 2649 Crimping tool  See: Tools and Equipment/951 2649 Crimping Tool 
951 2620 Stripping tool  See: Tools and Equipment/951 2620 Stripping Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Important information

When replacing with a new water pump, the water pump wiring must be extended and a rubber cap placed on the new water pump. The rubber cap is
included in service kit P/N 373 0575.
If the car already has the new type of water pump, the above adjustment is not required.

Removal

Removing the bumper cover, air baffles and combustion preheater module (CPM)

Remove the bumper cover. See: Casing, bumper front, replacing See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and
Repair.

Remove:

-

the air baffles on the left-hand side and on certain versions also on the right-hand side

-

the air baffle in the center.

Auxiliary Water Pump|Service and Repair|Page 24250 > < Glow Plugs, Engine Coolant Heater, Replacing|Page 24246