V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Release the catches. Pull off the panel
-
The panel has double sided adhesive tape. Ensure that any remains of the tape are removed from the black panel.
-
Remove the backing from the tape on the panel and press the panel into place.
Finishing
After replacing the control module, the following must be carried out.
-
Reprogram the customer programmed data
-
Carry out self-adjustment of the damper motor end positions
-
Test drive the car. Check that the function of the climate control system is OK
-
Then check that no diagnostic trouble codes have been stored during the replacement.
Information about programming the control module, damper motor self-adjustment and reading off diagnostic trouble codes (DTCs) can be found under
VADIS communication.
Dashboard environment panel switches