V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Twist the adjusting screw on the motor so that the shaft is extended, in order to facilitate installation
-
Remove the cover for the outer bulb
-
Apply grease to the ball
-
Pull the reflector backwards. Place the ball in the mounting for the reflector
-
Place the ball in the groove of the mounting and twist the ball onto the mounting. Feel that the ball is correctly installed using your fingers
-
Twist the motor upwards axially so that the ball slides into the mounting
-
Twist the motor into the correct position
-
Connect the connector
-
Install the cover for the bulb
-
Align the headlamps.