volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Leak Detection Pump, Evaporative System|Service and Repair|Page 15798 > < Leak Detection Pump, Evaporative System|Service and Repair
Page 2
background image

Remove:

-

left rear wheel

-

the rear plastic nut for the plastic fender liner.

Drill out the two blind rivets holding the heat deflector plate at the rear sub-frame mounting and the third rivet on the rear bracket for the exhaust system.
Use a 5 mm drill bit.
Remove the plastic nuts and the heat deflector plate.

Removing the leak diagnostic pump

Leak Detection Pump, Evaporative System|Service and Repair|Page 15798 > < Leak Detection Pump, Evaporative System|Service and Repair